Overview - SUBFRAME Mount, Vehicles With Manual Transmission 02S: Notes

Fig 1: Exploded View Of Subframe Mount, Vehicles With Manual Transmission 02S

Courtesy of AUDI OF AMERICA, LLC

1. Engine Support
   • Removing and installing. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .
2. Bolt
   • Tightening specification and sequence. Refer to INSTALLING THE PENDULUM SUPPORT .
   • Always replace
3. Engine Mount
   • With support arm
   • Removing and installing. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
4. Bolt
   • 40 Nm +90°
   • Always replace
5. Bolt
   • 20 Nm +90°
   • Always replace
6. Bracket
   • For the coolant check valve
7. Bolt
   • 8 Nm
8. Bolt
   • 60 Nm +90°
   • Always replace
9. Bolt
   • Tightening specification and sequence. Refer to INSTALLING THE PENDULUM SUPPORT .
   • Always replace
10. Pendulum Support
    • Removing and installing. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
11. Bolt
    • Tightening specification and sequence. Refer to INSTALLING THE PENDULUM SUPPORT .
    • Always replace
12. Bolt
    • Tightening specification and sequence. Refer to INSTALLING THE PENDULUM SUPPORT  v.
    • Always replace
13. Bolt
    • 60 Nm +90°
    • Always replace
14. Bolt
    • 60 Nm +90°
    • Always replace
15. Transmission Mount
    • With support arm
    • Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
16. Bolt
    • 50 Nm + 90°
    • Always replace
17. Transmission Support
18. Bolt
    • Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0D9] .
19. Bolt
    • Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0D9] .
20. Brace
21. Bolt
    • Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0D9] .