Installing The Pendulum Support
WARNING: This page is about a different variant/trim than selected.
 Courtesy of AUDI OF AMERICA, LLC
|
NOTE:
Replace the bolts that were tightened with an additional turn.
-- Tighten the bolts in the steps shown in the sequence:
| Step |
Bolts |
Tightening Specification/Additional Turn |
| 1. |
-2 and 3- |
50 Nm |
| 2. |
-1- |
130 Nm |
| 3. |
-1 to 3- |
90° additional turn |