Right Impact Member Mount, Removing And Installing: Installing

• Tightening specification. Refer to OVERVIEW - IMPACT MEMBER .

Install in reverse order of removal. Note the following:

-- Tighten the impact member mount according to the marking made during removal.

-- Connect the secondary air injection pump.

-- Install the connecting brace. Refer to Installing .

-- Install the impact member. Refer to Installing .

-- Install the right wheel spoiler. Refer to FRONT WHEEL SPOILER, REMOVING AND INSTALLING, AUDI A7/S7 .

-- Install the front noise insulation. Refer to FRONT NOISE INSULATION, REMOVING AND INSTALLING .