Overview - Input Shaft
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2016 Audi A4, 2015 Audi A4, 2014 Audi A4, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Input Shaft
- Refer to INPUT SHAFT, REMOVING AND INSTALLING
- Cover
- For the input shaft
- Refer to INPUT SHAFT COVER, REMOVING AND INSTALLING
- O-Ring
- Replacing
- Ball Bearing
- For the input shaft
- Removing and installing. Refer to INPUT SHAFT BALL BEARING, REMOVING AND INSTALLING
- Locking Ring
- Measuring
- Replacing
- Shaft Seal
- For the input shaft
- Replacing. Refer to INPUT SHAFT SEAL, REPLACING .
- Locking Ring
- Different versions, always replace
- Select thickness. Refer to SELECTING THE LOCKING RING THICKNESS -1- , (See Figure).