Clutch Release Lever With Release Bearing And Guide Sleeve: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
-- Clean the guide sleeve -6- and install with the locking plate -5-.
-- Clean boot threads -4- with a wire brush. Then install and tighten the bolts with locking fluid AMV 185 101 A1. Tightening specification, refer to item 6.
CAUTION:
Noises when actuating the clutch
- Lubricate the bearing area on the clutch release lever with adhesive lubricating paste G 000 150. Refer to item 5.
-- Engage the release bearing -2- and the spring -3- into the clutch release lever -1- and install them both.