Section 104 (Clutch - Manual Transmission 0B2 AWD (Coupe) (As Of 09.2009))
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
- Clutch
- Description And Operation
- Clutch, Servicing
- Clutch, SACHS Assembly Overview
- Notes
- How To Recognize Manufactured By SACHS
- Check The Plastic Washer -A- Inside The Dual Mass Flywheel Manufactured By SACHS
- Measuring The Wear On The Plastic Washer Inside The Dual Mass Flywheel Manufactured By SACHS
- Checking The Needle Bearing Inside The Dual Mass Flywheel On A 4-Cylinder TDI Vehicle: Vehicle (Except On The 125 Kw TDI)
- Sac Clutch Pressure Plate, Checking For Distortion, Cracks And Burn Marks
- Checking Ends Of The Diaphragm Spring
- Checking The Pull-Springs And Rivet Connection
- Checking The Metal Ring
- Clutch Release Mechanism Assembly Overview
- Clutch, LUK Assembly Overview
- Specifications
- Diagnosis And Testing
- Removal And Installation
- Special Tools
- Description And Operation