Oil Spray Jets, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Removing Cylinder "1" Through "3" :

The transmission is removed. Refer to TRANSMISSION, REMOVING AND INSTALLING .

-- Remove the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

- Only let the engine turn in the direction of engine rotation.

-- Turn the crankshaft with the :T40263 , :T40314 and the 24 mm socket -arrow- until the corresponding bolt is accessible.

Removing Cylinder "4" :

The engine is removed and secured to the engine/transmission holder. Refer to ENGINE, SECURING TO ENGINE AND TRANSMISSION HOLDER .

-- Remove the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .

-- Remove the balance shaft timing chain. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .

-- Remove the connecting rod bearing cap.

-- Remove the crankshaft bearing cap.

-- Remove the crankshaft.

Continued for All Cylinders:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the pressure relief valve -1- using the :T10545 .

-- Remove the oil spray jet -2-.