Transmission Side Sealing Flange, Removing And Installing, Version B (Oil Side Sealing Lip): Notes
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Crank Shaft Seal Installer - Guide Piece :T10122/6 or :T10122/6A from the Seal Installer - Crankshaft:T10122B or :T10122C
- Guide Piece to Crankshaft Seal Install Kit - Guide Piece :T10122/1 from Seal Installer - Crankshaft:T10122B or :T10122C
- Hand Drill with Plastic Brush Attachment
- Protective Eyewear
- Refer to the Parts Information for the correct sealant.
CAUTION:
This procedure may contain mandatory replaceable parts. Refer to component overview (OVERVIEW - DRIVE PLATE ), prior to starting procedure.