Drive Plate, Removing And Installing, Automatic Transmission: Notes
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Flywheel Lock Adapter :VW558
- Depth Gauge
- M8x40 hex bolt and M8 hex nut
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview (OVERVIEW - DRIVE PLATE ), prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Drive plate
:VW558 , Preparing:
-- Tighten the M8x40 hex bolt -A- with a hex nut on the :VW558 .