Vibration Damper, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Counterhold - Vibration Damper :T10355
- Vibration Damper Assembly Tool :T10531
- Wrench - 21mm :T40263
- Adapter :T40314
- 24 mm Socket
CAUTION:
This procedure may contain mandatory replaceable parts. Refer to component overview (OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE, VERSION 1 and OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE, VERSION 2 ), prior to starting procedure.
Individual Components of the :T10531 :
- Vibration Damper Assembly Tool - Counterhold Tool :T10531/1
- Vibration Damper Assembly Tool - Tensioning Pins :T10531/2
- Vibration Damper Assembly Tool - Turning Over Tool :T10531/3
- Vibration Damper Assembly Tool - Knurled Nut :T10531/4
- The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt, the chain sprocket must be secured to the crankshaft as described in the following.