Sub-Assembly Bracket, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview (OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE, VERSION 1 and OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE, VERSION 2 ), prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Sub - Assembly Bracket
- O-rings - Connection to sub-assembly bracket to cooling pump housing