Tail Pipe Trim, Removing and Installing

Removing 

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING, AUDI RS 4 .

-- Remove the bolts -arrows-.

-- Remove the tail pipe trim -1- inward from the bumper cover.

Courtesy of AUDI OF AMERICA, LLC

Installng 

Courtesy of AUDI OF AMERICA, LLC

• Tightening specifications. Refer to OVERVIEW - BUMPER COVER, AUDI RS 4 .

Install in reverse order of removal. Note the following:

-- Check the trim distance for the tail pipe -2- on the bumper cover -1- :

• Dimension -x- = uniform gap.

-- Install the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING, AUDI RS 4 .