Fastener Tightening Specifications
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Bolt Size | Nm |
|---|---|---|
| Bracket2 | ||
| 10 | ||
| 20 | ||
| Bracket3 | 10 | |
| Bracket for Exhaust System | ||
| Bolt | 23 | |
| Nut | 23 | |
| Clamping Sleeve, Nut | 23 | |
| Exhaust Manifold, Nut | 231 | |
| Front Exhaust Pipe with Catalytic Converters and Front Muffler, Nut | 401 | |
| Suspended Mount | 23 | |
| Tunnel Brace | 23 | |
| Engine Code BUB | ||
| Bracket or Secondary Air Injection (AIR) Pump Motor, Nuts and Bolts | 9 | |
| Connection for Coolant and Secondary Air Injection (AIR) Combi-Valve | 9 | |
| Connection for right Secondary Air Injection (AIR) combination valve | 9 | |
| Engine Code CBRA | ||
| Angle Piece for right Secondary Air Injection (AIR) combination valve | 9 | |
| Bracket for Secondary Air Injection (AIR) pump motor, Nuts and Bolts | 9 | |
| Pipe | 9 | |
| Secondary Air Injection Sensor 1 | 3.5 | |
|
||