Hood Latch, Removing And Installing

Fig 1: Identifying Hood Latch

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 10 Nm
Rear Lid Latch
- Loosen the bumper cover at the top.
- Remove the headlamps, refer to [For engine(s) CDRA, CTUB, CEUA, CGTA, CPNA, CEJA] Headlamps .
- Disconnect the lid lock cable at the coupling.
- Disconnect the connector.
- Remove the bolts -1-.
- Disengage the release cable from the hood latch.
Bolt
- 10 Nm
Lock Carrier
Connector
Hood Latch Cable
- Engage the release cable, refer to Release Cable, Engaging in Hood Lock
- The release cable must lock into the hood latch -arrow-.