Rear Final Drive 0BF - Flange/Driveshaft Shaft Seal, Replacing: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2018 Audi A7 Quattro, 2017 Audi S7, and 2017 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Puller - Multiple Use :VW391
Puller - Unit Injector :T10055
-2- Puller - Unit Injector - Adapter 2 :T10055/2
Two M 8 x 30 Bolts
Seal Installer - Hollow Shaft :T10380
Seal Installer - Input Shaft :T40222
Seal Installer - Input Shaft - Guide Sleeve :T40222/1
Sealing Grease :G 052 128 A1
Inductive Heater :VAS6414 or Commercially Available Hot Plate and Digital Thermometer :VAS6519