Installed Position: Locking Rings -A- For The Ball Bearings -B-

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Installed Position: Locking Rings

Courtesy of AUDI OF AMERICA, LLC

The bevel -arrow- on the locking ring -A- faces away from the ball bearing -B-.

NOTE:

The locking rings and the ball bearings for the input and output shafts are identical.