Removing And Installing The Gearshift Shaft Cover -A-
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
- The gearshift shaft is removed.
-- Remove the bolts that attach the cover -A- to the transmission cover.
-- Remove the cover using the VW 420 in direction of -arrow-.
-- Clean the sealing surfaces on the cover and transmission cover.
-- Apply sealing compound AMV 188 001 02 evenly and use new bolts to attach the cover -11- TRANSMISSION COVER .