Rear Final Drive
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, and 2013 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Subframe
- Removing and installing, refer to OVERVIEW - SUBFRAME .
- Bolt
- 95 Nm
- Bolt
- 55 Nm
- Bolt
- 55 Nm
- Depending on the date of manufacture for the balance weight mounting BALANCE WEIGHT ON THE REAR FINAL DRIVE
- Heat Shield
- Bolt
- 20 Nm
- Driveshaft
- Removing and installing, refer to REMOVAL AND INSTALLATION .
- Rear Final Drive
- Versions with balance weight BALANCE WEIGHT ON THE REAR FINAL DRIVE
- All Vehicles except for Audi A8 and Q5 Hybrid removing and installing, refer to REAR FINAL DRIVE
- Audi A8 removing and installing, refer to the appropriate service information
- Audi Q5 Hybrid removing and installing, refer to the appropriate service information
- Driveshaft
- Removing and installing, refer to DRIVESHAFT BOLTED ON TRANSMISSION SIDE and DRIVESHAFT, MOUNTED ON TRANSMISSION SIDE
- Removing and installing on the rear final drive, refer to DRIVESHAFT, REMOVING FROM REAR FINAL DRIVE
- Crossmember