Right Engine Mount, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications. Refer to OVERVIEW - SUBFRAME MOUNT .

NOTE:

Replace the bolts that were tightened with an additional turn.

Vehicles with S tronic Transmission 0B5

-- Install the ATF lines. Refer to ATF PIPES, REMOVING AND INSTALLING .

Continuation for All Vehicles

-- Install the right front wheel housing liner. Refer to WHEEL HOUSING LINER .

-- Install the noise insulations. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Install the front wheel. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .