Left Engine Mount, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
Tightening specifications
- Refer to OVERVIEW - SUBFRAME MOUNT .
- Refer to Figure.
NOTE:
Replace the bolts that were tightened with an additional turn.
-- Tighten the subframe. Refer to OVERVIEW - SUBFRAME .
-- Install the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING .
-- Install the engine oil cooler. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .
-- Install the noise insulations. Refer to Refer to NOISE INSULATION, REMOVING AND INSTALLING .