Fastener Tightening Specifications: Notes
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Fastener Size | Nm |
|---|---|---|
| After-Run coolant pump to engine | - | 4 |
| Bracket for after-run coolant pump to engine | - | 9 |
| Bracket for front left coolant pipes | - | 22 |
| Bracket for left charge air cooling circuit radiator, nut | - | 9 |
| Bracket for charge air coolant pump, nut | - | 9 |
| Connecting piece for coolant hose | - | 9 |
| Coolant thermostat | - | 9 |
| Coolant pump | - | 9 |
| Fan shroud, version 1 | - | 4.5 |
| Fan shroud, version 2 | - | 3.5 |
| Front charge air cooling circuit radiator | - | 4.5 |
| Front coolant pipe | - | 9 |
| Idler roller for ribbed belt | - | 42 |
| Left front coolant pipes | - | 9 |
| Lower coolant pipe on the supercharger | - | 5 |
| Radiator bracket 1 | ||
| - | 4.5 | |
| - | 5 | |
| Ribbed belt pulley for coolant pump | - | 20 |
| Upper coolant pipe | - | 9 |
| Upper coolant pipe on the supercharger | - | 5 |
|
||