Fan Shroud: Installing
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specifications, refer to RADIATOR AND COOLANT FAN OVERVIEW .
NOTE:
Secure all hose connections with hose clamps of the same type as those equipped by the factory.
-- Vehicles with S-Tronic transmission: Tighten the ATF pipes. Refer to Removal and Installation .
-- Install the lock carrier cover and the bumper cover end plate. Refer to OVERVIEW - BUMPER COVER .
-- Connect the connection to the coupling. Refer to Figure.
-- Fill with coolant, refer to CHECK THE COOLANT LEVEL .
-- Vehicles with S-Tronic transmission: Check the ATF level. Refer to General Information .