Vibration Damper: Installing
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
Tightening specifications:
- RIBBED BELT DRIVE, VEHICLES WITH HYDRAULIC POWER STEERING OVERVIEW
- RIBBED BELT DRIVE, VEHICLES WITH ELECTRO-MECHANICAL POWER STEERING OVERVIEW
NOTE:
Replace bolts that are tightened to the specification.
Installation is only possible in one position because of the offset holes.
-- Install the radiator bracket and radiator. Refer to RADIATOR AND COOLANT FAN OVERVIEW .
-- Install the bumper cover end plate. Refer to "Front Bumper" in FRONT BUMPER .
-- Install the left front coolant pipes. Refer to LEFT FRONT COOLANT PIPES .
-- Installing the ribbed belt: