Front Seat, Removing And Installing, Power: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

-- Move the seat into its service position. Refer to FRONT SEAT, MOVING INTO SERVICE POSITION .

-- Remove front bolts -1- (quantity: 2).

Fig 1: Identifying Front Bolt To Console

Courtesy of AUDI OF AMERICA, LLC

-- Operate seat forward/back adjuster and move the seat -2- as far forward as possible.

-- Remove rear bolts -1- (quantity: 2).

3 - Rear Console

4 - Front Console

-- Turn on the ignition.

-- Disconnect the battery ground cable with the ignition turned on. Refer to BATTERY, DISCONNECTING AND CONNECTING .

WARNING:

Before Handling Pyrotechnic Components (For Example, Disconnecting The Connector), The Person Handling It Must "Discharge Static Electricity". This Can Be Done By Touching The Door Striker, For Example.

-- Disconnect the harness connectors. Refer to CONNECTORS, DISCONNECTING AND CONNECTING on the connector station in the floor.

-- Connect the Airbag Adapter. Refer to AIRBAG ADAPTER, CONNECTING AND DISCONNECTING .

-- Lift the front seat with a second technician and remove it from the vehicle.