Overview - Bumper Cover, AUDI RS5: Notes

Fig 1: Exploded View Of Bumper Cover, Audi Rs5

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- 2 Nm
- Quantity: 5
Rear Bumper Cover
- Removing and installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
Trim for the Left Tail Pipe
- Removing and installing. Refer to BUMPER GUIDE PIECES, REMOVING AND INSTALLING .
Bolt
- 2 Nm
- Quantity: 4
Left Side Mount
- For the bumper cover
- Removing and installing. Refer to BUMPER GUIDE PIECES, REMOVING AND INSTALLING .
Bolt
- Quantity: 3
- Tightening sequence SIDE MOUNT AND BUMPER COVER LOCKING MECHANISM - TIGHTENING SPECIFICATIONS AND SEQUENCE
Bumper Cover Locking Mechanism
- Adjusting bolt tightening specification: 3 Nm
- Removing and installing. Refer to Installing .
Bolt
- Quantity: 2
- Tightening sequence. Refer to SIDE MOUNT AND BUMPER COVER LOCKING MECHANISM - TIGHTENING SPECIFICATIONS AND SEQUENCE
Center Guide
- For the bumper cover
- Removing and installing. Refer to Installing .
Nut
- 1.5 Nm
- Quantity: 2
Rear Parking Aid Sensor
- Removing and installing. Refer to PARKING AID .
Trim for the Right Tail Pipe
- Removing and installing. Refer to Installing .
Bumper Cover Locking Mechanism
- Adjusting bolt tightening specification: 3 Nm
- Removing and installing. Refer to Installing .
Bolt
- Quantity: 2
- Tightening sequence. Refer to SIDE MOUNT AND BUMPER COVER LOCKING MECHANISM - TIGHTENING SPECIFICATIONS AND SEQUENCE
Right Side Mount
- For the bumper cover
- Removing and installing. Refer to BUMPER GUIDE PIECES, REMOVING AND INSTALLING .
Bolt
- Quantity: 3
- Tightening sequence. Refer to SIDE MOUNT AND BUMPER COVER LOCKING MECHANISM - TIGHTENING SPECIFICATIONS AND SEQUENCE
Bolt
- 2 Nm
- Quantity: 4
Cap
- For the towing eye
Diffuser Trim
- Removing and installing. Refer to ATTACHMENTS, REMOVING AND INSTALLING, AUDI RS5 .