Attachments, Removing And Installing, AUDI RS5: Installing

• Tightening specifications. Refer to OVERVIEW - BUMPER COVER, AUDI RS5 .

Install in reverse order of removal. Note the following:

-- The diffuser trim must engage completely.

Tail Pipe Trim 

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Removing

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

-- Remove the tail pipe trim -1- inward from the bumper cover.

Installing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Tightening specifications. Refer to OVERVIEW - BUMPER COVER, EXCEPT AUDI RS5 .

Install in reverse order of removal. Note the following:

-- Check the trim distance for the tail pipe -2- on the bumper cover -1- :

• Dimension -x- = uniform gap.

-- Install the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

Mount for the Tail Pipe Trim 

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install in reverse order of removal. Note the following:

-- Install the tail pipe trim. Refer to Installing .