Brake Pedal, Removing And Installing, Vehicles With Automatic Transmission: Removing

-- Remove the driver side instrument panel cover -1 to 3-.

Fig 1: Identifying Driver Side Instrument Panel Cover

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -C- on the footwell vent.

Fig 2: Identifying Footwell Vents

Courtesy of AUDI OF AMERICA, LLC

-- Remove the footwell vent -A-.

-- Remove the brake lamp sensor. Refer to BRAKE LAMP SENSOR, REMOVING AND INSTALLING .

-- Separate the brake pedal from the brake booster. Refer to BRAKE PEDAL, REMOVING FROM BRAKE BOOSTER .

-- Remove the bolt -11-.

Fig 3: Exploded View Of Brake Pedal Assembly With Components

Courtesy of AUDI OF AMERICA, LLC

-- Remove the retainer -5- and remove the pins -4- to the left.