Overview - Instrument Panel

Fig 1: Exploded View Of Instrument Panel Assembly

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- 1.5 Nm
- Quantity: 3
Light Switch -E1-
- Removing and Installing. Refer to ROTARY LIGHT SWITCH -EX1-, REMOVING AND INSTALLING .
Headlamp Range Control Adjuster -E102-
- Removing and Installing. Refer to HEADLAMP RANGE CONTROL ADJUSTER -E102-, REMOVING AND INSTALLING .
Bolt
- 3 Nm
- Quantity: 6
Frame
- For the instrument cluster
- Removing and Installing. Refer to INSTRUMENT CLUSTER FRAME, REMOVING AND INSTALLING .
Left Side Instrument Panel Vent
- Removing and Installing. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING, SIDE INSTRUMENT PANEL VENT .
Bolt
- 3 Nm
- Quantity: 2
Bolt
- 3 Nm
- Quantity: 2
Nut
- Quantity: 6
- 0.5 Nm
  NOTE:
  Tighten the nuts carefully to prevent the mounting pins on the speaker trim from shearing off.
Mount
- For speaker
- Removing and Installing. Refer to SPEAKER MOUNT, REMOVING AND INSTALLING .
Mid-Treble Speaker
- Equipped on some models
- Removing and installing. Refer to CENTER SPEAKER, REMOVING AND INSTALLING .
Side Speaker Trim
- Equipped on some models
- Removing and Installing. Refer to SPEAKER TRIM, REMOVING AND INSTALLING, SIDE SPEAKER TRIM .
Nut
- 0.5 Nm
- Quantity: 6
  NOTE:
  Tighten the nuts carefully to prevent the securing pins on the defroster vent from shearing off.
Sunlight Photo Sensor -G107-
- Removing and installing. Refer to SUNLIGHT PHOTO SENSOR -G107-, REMOVING AND INSTALLING .
Center Speaker Trim
- Equipped on some models
- Removing and Installing. Refer to SPEAKER TRIM, REMOVING AND INSTALLING, CENTER SPEAKER .
Upper Center Defroster Vent
- Removing and Installing. Refer to FRONT CENTER DEFROSTER VENT, REMOVING AND INSTALLING .
Mid-Treble Speaker
- Equipped on some models
- Removing and installing. Refer to CENTER SPEAKER, REMOVING AND INSTALLING .
Upper Side Defroster Vent
Bolt
- 3 Nm
- Quantity: 2
Instrument Panel
WARNING:
- Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Note the allocation of the airbag to the instrument panel. Refer to the Parts Information.
- Removing and Installing. Refer to INSTRUMENT PANEL, REMOVING AND INSTALLING .
Right Side Instrument Panel Vent
- Removing and Installing. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING, SIDE INSTRUMENT PANEL VENT .
Front Passenger Airbag
WARNING:
- Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Note the allocation of the airbag to the instrument panel. Refer to the Parts Information.
- Overview. Refer to OVERVIEW - FRONT PASSENGER AIRBAG .
- Deactivating and activating possible using the key switch
- Removing and Installing. Refer to FRONT PASSENGER AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
Nut
- Tightening specification OVERVIEW - FRONT PASSENGER AIRBAG
Bolt
- 3 Nm
MMI Screen
- Removing and Installing. Refer to MMI SCREEN COVER, REMOVING AND INSTALLING .
Cover
- For MMI screen
- Removing and Installing. Refer to MMI SCREEN COVER, REMOVING AND INSTALLING .
Center Instrument Panel Vent
- Removing and Installing. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING, CENTER INSTRUMENT PANEL VENT .
Radio/Navigation System
- Equipped on some models
- Removing and installing. Refer to RADIO, REMOVING AND INSTALLING .
- Frame, Removing and Installing. Refer to RADIO/NAVIGATION SYSTEM FRAME, REMOVING AND INSTALLING .
Front Information Display Control Head Module -J523-
- Removing and installing. Refer to COMPONENT LOCATION OVERVIEW - INFOTAINMENT SYSTEM .
Bolt
- Tightening specification. Refer to COMPONENT LOCATION OVERVIEW - INFOTAINMENT SYSTEM .
Climatronic Control Module -J255-
- Removing and installing. Refer to DISPLAY AND CONTROL HEAD -J255-, REMOVING AND INSTALLING .
Bolt
- Tightening specification. Refer to OVERVIEW - INSTRUMENT CLUSTER .
Bolt
- 3 Nm
Trim
- For Access/Start Authorization Switch -E415-
- Removing and Installing. Refer to ACCESS/START AUTHORIZATION SWITCH TRIM, REMOVING AND INSTALLING .
Access/Start Authorization Switch -E415-
- Removing and Installing. Refer to ACCESS/START AUTHORIZATION SWITCH -E415-, REMOVING AND INSTALLING .
Instrument Cluster
- Removing and installing. Refer to OVERVIEW - INSTRUMENT CLUSTER .
Light Switch Trim
- Removing and Installing. Refer to LIGHT SWITCH TRIM, REMOVING AND INSTALLING .