Fastener Tightening Specifications

Oil Pan - Tightening Specification and Sequence 

Fig 1: Identifying Oil Pan And Fasteners

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts -arrows- diagonally in steps to 16 Nm.

Direct Shift Gearbox (DSG) Transmission Mechatronic -J743- - Tightening Specification and Sequence 

Fig 2: Identifying Direct Shift Gearbox Bolt Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in 2 steps in the following sequence: -1 through 10- :

Transmission Oil Pump - Tightening Specification and Sequence 

Fig 3: Transmission Oil Pump Tightening Specification And Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten bolts -arrows- in a diagonal sequence (different bolts depending on version):

Countersunk Bolts -A- :

-- Tighten countersunk bolts to 8 Nm.

Flat Head Bolts -B- :

-- Tighten flat head bolts in 2 stages as follows:

Transmission Oil Pump Cover -A- - Tightening Specification and Sequence 

Fig 4: Identifying Cap For Transmission Oil Pump And Fasteners

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts -arrows- diagonally in steps to 8 Nm.

Transmission Input Speed Sensor -G182- and Clutch Oil Temperature Sensor -G509-

Fig 5: Transmission Sensors And Bolts

Courtesy of AUDI OF AMERICA, LLC