Fastener Tightening Specifications: Notes
WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Fastener Size | Nm |
|---|---|---|
| Camshaft Toothed Belt Sprocket to Camshaft Bolt1 | - | 20 + 45° |
| Camshaft Hub Bolt | - | 100 |
| Crankshaft Toothed Belt Gear to Crankshaft Bolt1 | - | 120 + 90° |
| Toothed Belt Idler Roller to Cylinder Block Nut | - | 20 |
| Toothed Belt Tensioner to Cylinder Head Stud Nut1 | - | 20 + 45° |
| Center and Lower Toothed Belt Guard Bolt | - | 10 |
| Engine Mount Bracket1 | - | 40 Nm +180° |
| Rear Toothed Belt Guard to Cylinder Block/Head Bolts3 | - | 101 |
| - | 20 | |
| Cylinder Head Cover Bolt | - | 9 |
| High Pressure Pump Toothed Belt Sprocket1 | - | 20 + 90° |
| Toothed Belt Idler Roller to Cylinder Block Bolt2 | - | 15 |
| - | 50 + 90°1 | |
|
||