Fuse Panel In Engine Compartment E-Box

Observe notes on contact corrosion. Refer to CONTACT CORROSION .

Removing

Fig 1: Releasing Clips To Remove Cover From Fuse Holder

Courtesy of AUDI OF AMERICA, LLC

-- Remove the fuses from the fuse panel.

-- Release retaining clips -arrows- and remove the cover from the fuse panel.

-- Pull off retaining strip -1- for harness connectors -arrow- and remove harness connectors from connector socket.

Fig 2: Pulling Off Retaining Strip For Harness Connectors To Remove Harness Connectors From Connector Socket

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The exact assignment of the fuse panel in the engine compartment E-box can be found in the applicable wiring diagram. Refer to Wiring Diagram.

Installing

Install in reverse order of removal. Note the following:

-- Connect battery. Refer to Connecting .