Overview - Final Drive 0BC, 0BD: Notes
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Rear Final Drive
- Subframe
- Removing and installing. Refer to SUBFRAME WITH ATTACHMENTS, REMOVING AND INSTALLING .
- Bolt
- 95 Nm
- Bolt
- 55 Nm
- Bolt
- 55 Nm
- Depending on the date of manufacture for the balance weight fastener. Refer to OVERVIEW - FINAL DRIVE 0BC, 0BD - BALANCE WEIGHT ON THE REAR FINAL DRIVE .
- Heat Shield
- Bolt
- 20 Nm
- Driveshaft
- Removing and installing. Refer to DRIVESHAFT, REMOVING AND INSTALLING FROM REAR FINAL DRIVE .
- Rear Final Drive
- Versions with balance weight. Refer to OVERVIEW - FINAL DRIVE 0BC, 0BD - BALANCE WEIGHT ON THE REAR FINAL DRIVE .
- Refer to FINAL DRIVE, REMOVING AND INSTALLING
- Driveshaft
- Removing and installing. Refer to DRIVESHAFT, REMOVING AND INSTALLING .
- Removing and installing on the rear final drive. Refer to DRIVESHAFT, REMOVING AND INSTALLING FROM REAR FINAL DRIVE .
- Crossmember