LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 685 (Rear Final Drive 0BC, 0BD, 0BE & 0BF (As Of 05.2015)) >> 39 Final Drive, Differential >> Final Drive >> Overview - Final Drive >> Overview - Final Drive 0BC, 0BD >> Balance Weight on the Rear Final Drive

Balance Weight on the Rear Final Drive

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Final Drive Balance Weight
GWWA39-10466Courtesy of AUDI OF AMERICA, LLC
  1. Bolt
    • 22 Nm
  2. Balance Weight
    • Depending on the date of manufacture; for allocation.
  3. Rear Final Drive
  4. Crossmember
  5. Balance Weight
    • Depending on the vehicle; allocation .
  6. Bolt
    • Tightening specification. Refer to -item  4- Bolt (See Figure).
  7. Balance Weight
    • Depending on the date of manufacture; for allocation .
  8. Washer
  9. Bolt
    • Tightening specification. Refer to -item  4- Bolt (See Figure).
scientia non olet · About LEMON Manuals