LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S5 4.2, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1498 (Body Interior - Except Cabriolet (72-Seat-Frames & 74-Seats-Upholstery, Covers)) >> 72 - Seat - Frames >> Rear seats >> Outer backrest fitting, removing and installing

Outer backrest fitting, removing and installing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Removing 

Fig 1: Removing Bolts From Outer Fitting
GW00021040Courtesy of VOLKSWAGEN UNITED STATES, INC.

Tightening torque: 16 Nm

Installing 

Installation is reverse of removal.

scientia non olet · About LEMON Manuals