Motor for seat tilt adjustment, removing and installing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

Fig 1: Torque Wrench V.A.G 1410

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Torque wrench V.A.G 1410

Fig 2: Special Tool - Engine And Transmission Holder VAS 6095

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Engine and transmission holder VAS 6095

Fig 3: Fixture For Seat Repair VAS 6136

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fixture for seat repair VAS 6136

Fig 4: Motor For Seat Tilt Adjustment Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Connector

2 - Seat angle adjustment motor

Removal:

Remove seat → Front power seats with memory, removing and installing .
Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
Attach the front seat to the fixture for seat repair VAS 6136.
Remove bolts - 5 - (2x).

Remove screw - 4 -.
Remove connector - 1 -.
Remove bolts - 3 - (2x).
Remove motor for seat tilt adjustment - 2 -.

Installing:

Installation is reverse of removal.

3 - Screw

10 Nm
Qty. 2

4 - Screw

3.5 Nm

5 - Screw

5 Nm
Qty. 2