Input Shaft Seal, Removing And Installing: Installing

Fig 1: Identifying Installation Of Shaft Seal With Thrust Piece T10448

Courtesy of AUDI OF AMERICA, LLC

-- Lightly coat the outer circumference of the new shaft seal with oil.

-- Fill the space between the sealing- and dust lip half way with Sealing GreaseG 052 128 A1.

-- Drive in new shaft seal as far as stop without tilting it.

-- Install the transfer case. Refer to TRANSFER CASE, REMOVING AND INSTALLING .

-- Check the transmission fluid level in the transfer case. Refer to TRANSFER CASE, CHECKING TRANSMISSION FLUID LEVEL .