Charge Air Cooling Circuit Cooler, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal. Note the following:

NOTE:

If there are small impressions on the fins. Refer to COOLER AND CONDENSER ASSEMBLY .

Secure all hose connections with hose clamps of the same type as those equipped by the factory. .

-- Install the front bumper cover. Refer to FRONT BUMPER, REMOVING AND INSTALLING .

-- Install the front noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Check the coolant level. Refer to COOLANT, DRAINING AND FILLING .