Coolant Thermostat, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal. Note the following:

Tightening specifications. Refer to OVERVIEW - COOLANT PUMP AND THERMOSTAT

NOTE:

When removing and installing the coolant thermostat, make sure that the thermostat needle is installed correctly (conical end is inserted in the coolant thermostat wax thermostatic element). If necessary, push the thermostat needle all the way into the wax thermostatic element.

NOTE:

Replace the seal.

-- Install front coolant pipe. Refer to FRONT COOLANT PIPE, REMOVING AND INSTALLING .

-- Install the supercharger. Refer to SUPERCHARGER, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .