Balance Shaft, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal. Note the following:
- Tightening specifications. Refer to OVERVIEW - BALANCE SHAFT .
- Secure crankshaft -1- in "TDC" position using Crankshaft Locking PinT40069.
NOTE:
The balance weights can only be positioned one way on balance shaft.
-- Install the power take-off drive chain. Refer to POWER TAKE-OFF DRIVE CHAIN, REMOVING AND INSTALLING .
-- Install the timing chain cover lower section. Refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .
-- Install the belt pulley side sealing flange. Refer to SEALING FLANGE WITH CRANKSHAFT SEAL, BELT PULLEY SIDE, REMOVING AND INSTALLING .