LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Passenger Protection, Airbags And Seat Belts) >> 69 Passenger Protection, Airbags, Seat Belts >> Seat Belts >> Center Seat Belt Latch Securing Point (3RD Row), Removing And Installing >> Removing

Center Seat Belt Latch Securing Point (3RD Row), Removing And Installing: Removing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the 3rd row bench seat. Refer to THIRD ROW SEAT OVERVIEW .

-- Remove cargo tray and spare wheel.

-- Remove the screws -1- and the seat belt latch -2-.

Fig 1: Screws -1- And The Seat Belt Latch -2-, Locking Washers -3-
GWWA69-10191Courtesy of AUDI OF AMERICA, LLC
NOTE:

Screws -2- are secured against falling out with locking washers -3-.

scientia non olet · About LEMON Manuals