Belt Fastening Detection, Removing And Installing: Removing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC, ELECTRICAL AND MECHANICAL RESTRAINT SYSTEM COMPONENTS, SAFETY PRECAUTIONS AND TESTING PROCEDURES .

-- Remove passenger seat:

Manual front seat. Refer to FRONT PASSENGER SEAT OVERVIEW .
Electrically adjustable front seat (memory seat, power seat, and comfort seat). Refer to FRONT PASSENGER SEAT OVERVIEW .

-- Remove seat pan cover and padding:

Manual front seat. Refer to COVERS AND CUSHION, MECHANICAL FRONT SEATS .
Electrically adjustable front seat (memory seat, power seat, and comfort seat). Refer to COVERS AND CUSHION, POWER FRONT SEATS (MEMORY SEAT, POWER SEAT) .

NOTE:

Remove padding only until Front Passenger Seat Occupant Sensor -G128- -2- has been freed up!

Fig 1: Identifying Front Passengers Seat Occupied Sensor G128 Connector & Front Passengers Seat Occupied Sensor G128

Courtesy of AUDI OF AMERICA, LLC

-- Remove Front Passenger Seat Occupant Sensor -G128- connector -2-.

-- Carefully remove Front Passenger Seat Occupant Sensor -G128- -2- from seat padding -1-.