LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (4.2L - Cylinder Head & VALVETRAIN - Engine Code: Bar) >> 15 Cylinder Head, VALVETRAIN >> Removal And Installation >> Lower Timing Chain Cover >> Removing

Lower Timing Chain Cover: Removing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove drive plate. Refer to DRIVE PLATE .

-- Remove left and right timing chain covers. Refer to LEFT AND RIGHT TIMING CHAIN COVERS .

-- Remove the intake manifold. Refer to INTAKE MANIFOLD, REMOVING AND INSTALLING .

-- Remove oil filter housing. Refer to OIL FILTER HOUSING .

-- Remove the bolts -arrows-.

Fig 1: Identifying Bolts And Lower Timing Chain Cover
GWWA13-10291Courtesy of AUDI OF AMERICA, LLC

-- Remove bolts -1 to 13- and remove lower timing chain cover.

-- Press the rear crankshaft seal out of the lower timing chain cover.