Drive Plate: Removing
WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Engine-transmission assembly removed and separated on the VAS 6131 A. Refer to ENGINE AND TRANSMISSION, SEPARATING .
-- Insert 10-201 to loosen bolts.
-- Mark the installation position on drive plate to crankshaft using a felt-tip marker.
-- Remove drive plate.
-- Remove spacer washer behind.