LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (4.2L - Crankshaft & Cylinder Block - Engine Code: Bar) >> 13 Crankshaft, Cylinder Block >> Removal And Installation >> Drive Plate >> Installing

Drive Plate: Installing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in reverse order of removal, note the following:

NOTE:

Replace bolts which have been tightened to torque.

-- Install drive plate with spacer washer.

-- Reposition the 10-201 to tighten the bolts.

scientia non olet · About LEMON Manuals