Fastener Tightening Specifications

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Components	Fastener Size	Nm
Guide Tube Bolt	-	6

Oil Pan Tightening Sequence

Fig 1: Oil Pan, Oil Pan Bolts And Oil Level Sensor Connector

Courtesy of AUDI OF AMERICA, LLC

-- Tighten bolts in 3 stages as follows:

-- Tighten oil pan -1- to cylinder block bolts diagonally to 5 Nm.

-- Tighten oil pan to transmission bolts -arrows-, refer to ENGINE, INSTALLATION .

-- Tighten oil pan -1- to cylinder block bolts diagonally to 12 Nm.

NOTE:

Ignore -2-.