LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (4.2L - Exhaust System & Emission Controls - Engine Code: Bar) >> 26 Exhaust System, Emission Controls >> Removal And Installation >> Secondary Air Injection System Version 2 >> Secondary Air Injection Left Combination Valve >> Installing

Secondary Air Injection Left Combination Valve: Installing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in reverse order of removal, note the following:

NOTE:

Replace gaskets and O-rings.

Secure all hose connections with hose clamps appropriate for the model.

During installation, all cable ties must be installed at the same location.

scientia non olet · About LEMON Manuals