Reducing Agent Active Tank, Removing And Installing: Installation

WARNING: This page is about a different car, the 2011 Audi Q7, 2010 Audi Q7, and 2009 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications. Refer to REDUCING AGENT ACTIVE TANK AND ATTACHMENTS OVERVIEW .

-- Make sure the lines are clipped to the active tank.

-- Adapting Adaptation Value after Draining Reducing Agent or Replacing Components. Refer to ADAPTING ADAPTATION VALUE AFTER DRAINING REDUCING AGENT OR REPLACING COMPONENTS .