LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (3.0L - Exhaust System & Emission Controls - Engine Code: CATA) >> 26 Exhaust System, Emission Controls >> Exhaust Manifold >> Right Exhaust Manifold, Removing And Installing >> Installation

Right Exhaust Manifold, Removing And Installing: Installation

WARNING: This page is about a different car, the 2011 Audi Q7, 2010 Audi Q7, and 2009 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seals and self-locking nuts.

-- Install the air duct hoses and screw-type clamps .

Fig 1: Air Hose Clamp Identification
GWWA21-10396Courtesy of AUDI OF AMERICA, LLC

-- Install the upper part of air filter housing. Refer to AIR FILTER, REMOVING AND INSTALLING .

-- Install the right intermediate pipe, refer to RIGHT INTERMEDIATE PIPE, REMOVING AND INSTALLING .