Engine, Securing To Engine And Transmission Holder

Special tools and workshop equipment required 

• Lifting Tackle 3033
• Engine and Transmission Holder VAS 6095 with V8 FSI Engine Holder 6095/1-6A
• Shop Crane VAS 6100
• Lift Arm Extension for Workshop Crane VAS 6101
• Scissor Lift Table VAS 6131
• Joint Support VAS 6131/13-7

Procedure 

• Engine/transmission assembly removed and separated on VAS 6131. Refer to ENGINE AND TRANSMISSION, SEPARATING .
• Engine secured with VAS 6131/13-7.

-- Remove power steering pressure line banjo fitting -arrow-.

Fig 1: Identifying Power Steering Pressure Line Banjo Fitting

Courtesy of AUDI OF AMERICA, LLC

-- Remove engine bracket bolts at left and right -arrows-.

Fig 2: Identifying Engine Bracket Bolts At Left And Right

Courtesy of AUDI OF AMERICA, LLC

-- Engage 3033 on engine lifting eyes and on VAS 6100 with VAS 6101 as shown in the illustration.

Fig 3: Engaging Lifting Tackle 3033 On Engine Lifting Eyes And On Shop Crane VAS 6100 With Lift Arm Ext./Workshop Hoist VAS 6101

Courtesy of AUDI OF AMERICA, LLC

-- Tension engine slightly with workshop crane, do not lift.

-- Remove VAS 6131/13-7 from engine.

Fig 4: Identifying Joint Support VAS6131/13-7 At Front Of Engine

Courtesy of AUDI OF AMERICA, LLC

-- Raise engine from engine carrier.

-- Remove bolts at left and right -arrows- and remove engine support.

Fig 5: Identifying Engine Bracket On Right And Left Side Of Engine

Courtesy of AUDI OF AMERICA, LLC

-- Secure the engine on the VAS 6095 with the 6095/1-6A as illustrated.

Fig 6: Identifying Engine, Holder VAS 6095 And Bracket For V6 FSI Engine VAS 6095/1-5

Courtesy of AUDI OF AMERICA, LLC