Oil Check Valve And Spray Nozzle Valve: Installing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications, refer to OIL CHECK VALVE AND SPRAY NOZZLE VALVE OVERVIEW .

Installation is in reverse order of removal, note the following:

NOTE:

Replace gaskets and O-rings.

-- Install high pressure lines. Refer to Installing as described under "Fuel injectors, removing and installing".

-- Install intake manifold. Refer to INTAKE MANIFOLD, REMOVING AND INSTALLING .